Posts Tagged With: Technical Theatre Arts

Technical Theatre Arts Graduate Exhibition 2015

Every year we showcase the work of the third year graduates with an exhibition of scenery, lighting, sound, projection, props and costumes from the shows we put on here at the Guildhall School.

If you are in the London area during early June be sure to pop by and see for yourself some of the work that we blog about.

Open to the public  Wednesday 10th – Thusday 11th June.

TT exhibition poster

Advertisements
Categories: Uncategorized | Tags: , , , , , | Leave a comment

Blog is back for a Cunning Christmas

Hello world! Would you believe it?! Already the jolly season is with us and we are thus far blogless… No excuses I’m afraid other than being ear deep in set making and Design Realising, nonetheless; here comes the blog…

It’s been a very interesting term so far with two productions going out on the main stage at Silk Street: The Cunning Peasant and Her Naked Skin. While two more productions: True Dare Kiss and South Downs/The Browning Version – a double bill, were climbing the treads over at our Milton Court Studio Theatre. This blog is a quick run down of what went on during the build for The Cunning Peasant by Dvořák.

In the workshops it was a polystyrene skills fest bonanza as the team set to realising the darkly imagined Tudor timber framed Burton-esque vision of Thomas Hardy’s Essex as designed by Francis O’Connor.

First port of call on the build was – as it so often is – the construction of mass flattage. On this occasion steel frame flats were the order of the day, clad with 4mm ply to provide a base on to which we can glue polystyrene sheets which could then be carved into the herringbone brick infill. Strips of MDF cladding were fixed on top of the polystyrene to create a timber frame appearance synonymous with Tudor Period buildings.

Once the polystryrene had been marked up with the brick formation it was out with the kitchen knives and flat head screwdrivers to carve out the mortar lines and apply plenty of distressing to the edges of the ‘bricks’ adding to the realism. After this we use heat guns to consolidate the carved surface by slightly melt the surface of the poly before finally applying that ubiquitous flexible coating medium – Idenden; which provides a textured surface ready for painting.

Another element of the design which provided a great opportunity to hone our poly carving skills were the plentiful roof tiles. Each tile was cut from 8’ x 4’ sheets of foil covered insulation board, more often found insulating the walls and ceilings of buildings but as always we’re making use of everyday materials in innovative ways. So, the foil was peeled off and the edges of each tile distressed a little with the kitchen knives to look like slate, and once again the Idenden goes on prior to final paint effects, spatter, dry brushing and washes and voilà, roof tiles!!

This slideshow requires JavaScript.

Some elements of the design were sky high and this called for some heavy industrial metal processing; time for our monster Ring Rolling machine to be rolled out so we could curve some huge sections of steel tubing. All of our best remembered geometry and GCSE mathematics knowledge were dragged up from the depths and it was best sohcahtoa’s forward to employ some marvelous numeric wizardry and where that didn’t work we bent it a bit more until it did fit!

Our Ring Rolling machine is able to create large or tight curves in anything from light to heavy gauge steel, in square section, flat bar, rod and tube. This section of the design was to be flown above the stage, yet appear to be a continuation of the curved walls, in order to provide enough strength across the span of this section we used 3mm wall mild steel scaffold tubing – which is a demonstration the power of this Ring Rolling machine. The curves were carefully calculated and welded together before extra sections were added creating a branch like structure, on to which more roof tiles were T-nailed into place to create a kind of deconstructing blown away house morphing in to a tree effect, as I perceived it, for me it was a rich and conceptual design which was both interesting and functional in drawing attention to the whole space.

This slideshow requires JavaScript.

Two movable houses were also part of the build, one made from wooden flats and the other house from welded steel, as the 1st storey had to be fully functioning as a 1st floor. Both were mounted on wheeled trucks and both required more poly carving and of course roof tiles! End result; two extremely des-res, well-appointed – if a little compact, mock Tudor properties in a prime location in Central London. Not sure we can afford the rent on those, maybe we could use them as halls of residence for our new first years…

Speaking of whom….

I would like to extend a warm welcome to all of our new first years who have thus far been inducted into the beginning of their technical theatre education. After spending the first few weeks sampling various areas of our cross discipline faculty we threw then head first into a major build for their self-led Design Realisation Project! Results were stunning BUT… I’m giving nothing away until January, when a full run down with photographic evidence will take the form of our first blog of 2015, that’s right I said it 2015! Ouch!

See you then blogland

Design Realisation

 

Categories: Uncategorized | Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

The revolving door spins no more.

Hello everybody!!

It’s been over two months since our last post and now at last, all the shows are up, the academic year is drawing to its close and we’ve got a massive blog to let you know what we’ve been up to.

Since you last heard from us we have built an amazing cast concrete effect set for the Opera double bill; we’ve curated, installed and hosted our annual 3rd Year Graduate Exhibition; slipped in a couple of paint calls, prop makes and fit ups for Opera scenes and Napoli Milionara in the Milton Court Studio Theatre.  Finally, with a massive push we managed to the fit up the phenomenal build for the end of year musical ‘Grand Hotel’. Just a bit busy then!

It’s been a real who’s who of materials and techniques this term right across our Construction, Painting and Props departments.

Construction have had the volume turned up to 11 this term working on the set for Grand Hotel; we’ve seen welding on an industrial scale to construct fully operational revolving doors and two huge frames to support the mirrored and glazed frontage of the Grand Hotel as viewed from the inside.

First thing out were the two metal frames for the frontage and interior of the hotel; box steel welded and then clad in timber and MDF. Once the frames had been constructed it was through to the Paint Shop for black gloss on the cladding and gold leaf on the fret work and window frame details.

This slideshow requires JavaScript.

The Gold leaf we use is in fact brass leaf, it is applied directly from the roll onto surfaces coated with an adhesive called Gilding Size. The size is applied over a layer of yellow paint which hides any small holes in the leaf. Once the leaf is on and the size has dried, we brush off the excess leaf and apply two layers of french enamel varnish to seal it, and to achieve the antiqued effect the designer was looking for.

We’ve also been applying more black gloss effect to all the cladding, flats, panels, treads and handrails; you name it – we glossed it!

Before we could get anything fitted up in the Silk Street Theatre, we had to paint an intricate geometric floor design on the stage.

Our friends in the Technical Theatre department helped us out by rigging a projector on to a flying bar so we could project the design on to the stage and trace out the geometric pattern. The whole ellipse was first marbled in white before we marked on the lines for the masking. Thirty five rolls of masking tape later and we began to paint and marble the black tiles. Off with the masking tape the next day and finish the surface with a lovely glaze to create a beautiful marbled floor on to which the set could be installed.

Here’s the beautiful finished floor with a layer of Bona Mega gloss glaze over the marble painting. Amazing!

This slideshow requires JavaScript.

We’ve seen the construction of a rotating concierge reception desk made from bendi-ply, a glorious curved and fanned Grand staircase, and seemingly never ending fret work to create art deco inspired hand rails for the various balconies and decorative elements which adorn the glazing and carefully disguised steel deck.

This slideshow requires JavaScript.

All the glazing has also been dirtied down by spraying with a matt glaze with a bit of white paint mix in, adding to the slightly defunct look specified by the designer.

Props made three Belfast sinks on wheels complete with dressing room mirror lights.  We had some decorative brackets for the sinks laser cut by a CADCAM company in south London; CutLaserCut have a selection of industrial size laser cutters so we emailed over our design and they were put to work cutting 9mm MDF to make Art Deco style brackets…Laser Power!

End result is an absolutely epic set, I couldn’t wait to see the actors and musicians apply their magic and it certainly didn’t disappoint, it was a great show and a brilliant demonstration of the collaborative production process here at the Guildhall School of Music and Drama.

This slideshow requires JavaScript.

So there you have it, many weeks of hard work was certainly worth it looking at the amazing result. If you want to see a fascinating time lapse video of the set being taken to pieces you’re in luck! It’s quite a cathartic process destructing a set, the thing I find hardest to comprehend is that all those weeks of hard labour can be undone such a short time, about 12 hours. But that’s the way it goes I suppose. See the video courtesy of  the Technical Theatre department either on their blog or by clicking here.

We’re checking out of The Grand Hotel now;

The Props Department have realised a host of interesting and challenging creations this term. We’ve seen the creation of a prosthetic body parts including the frighteningly realistic torso of St. John the Baptist in its unfortunate de-limbed, decapitated and disembolwled state – so goes the brutal end for St. John in the Stradella opera. Our props students have also served an apprenticeship of sorts in coopering, deconstructing Scottish whisky barrels and recreating a fake barrel mid construction which allowed the opera singers to simulate the construction of the barrel during the performance of Arne’s The Cooper. Sound complicated? It is! See Pat’s Blog for a full run down.

Any finally, to round up this academic years activity, our annual first year Puppet Project!

Our first years have just presented their end of year project. The theme for this years project was the Grim tale of Hansel & Gretel set in an urban landscape, conceived as: HSNL + GRTL

The project kicked off with a crash course in puppetry with puppetry guru Steve Tiplady who gave a half day crash course in making and operating puppets.

This slideshow requires JavaScript.

The first years then spent a week creating their puppets and taking crash courses in lighting and video editing from our lighting and video lecturers, then it was into the studio, out on location and finally many hours in the editing suite to create their fantastic version of the folk story, great work guys.

That’s it from us until September so enjoy your summer and we’ll see you on the other side.

I’ll leave you with the video of the first years puppet project HSNL + GRTL, enjoy!

 

 

 

 

Categories: Uncategorized | Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

Showcasing talent and paving the way…

Well it’s about time I share some of the photos from our Graduate Exhibition which took place yesterday in the Barbican Centre Art Gallery…

The Graduate Exhibition, our first of a new annual event, showcased a selection of work from some of our graduating year group in the amazing Barbican Art Gallery.  The evening was brilliant with graduating students meeting technical theatre alumni and industry professionals; discussing aspiring careers in the industry and looking at some of the amazing work our students have produced over the last few years at the Guildhall School.  It was such a lovely chance to display work and celebrate the successes of our graduating year group.  We had a brilliant turnout, especially considering it is our first taster of a graduate exhibition, and the event was very well received.  It has taken a lot of hard work to put together but I think you will agree it looked brilliant and I hope next year’s graduating students are already planning their exhibits for next year…it’s going to be bigger and who knows…even better?

One last thing to mention, an important note that I feel particularly strongly about:

The exhibition was designed to reflect the design realisation department’s (and the whole school’s) emphasis on sustainability.  All of the tables, chairs and plinths used in the exhibition were from our own furniture store, previously used in Guildhall School productions and all of the display boards and name plaques were made from materials re-used and up-cycled from materials used in the construction of the scenery from previous shows.  I hope use of mis-matched furniture in the pristine environment of the Barbican Art Gallery mirrored our group of eclectic, yet excellently presented students that make up our amazing graduating year group.  In keeping with this theme, the display boards are safely stored ready for use again next year…I told you I feel strongly about it!

Well done to all of the 3rd year students who took part in the exhibition, I hope you enjoyed it as much as I did.  Looking forward to seeing you attend next year’s Graduate Exhibition, as alumni and industry professionals.  Thanks also to all of the technical theatre staff and Guildhall School staff for supporting the event; from marketing work, to painting display boards on a sunny Sunday afternoon…

Abi

Categories: Uncategorized | Tags: , , , | 1 Comment

Picture of the week…

A quiet moment of reflection…second year Jennie surveying an evening’s hard work at the end of a busy paintcall for The Laramie Project.

First show tonight- good luck to all involved especially all the technical theatre students (and staff!) working tirelessly behind the scenes to make this another successful and world class Guildhall School production!

20130322-062611 PM.jpg

Categories: Uncategorized | Tags: , , , , , , | Leave a comment

Create a free website or blog at WordPress.com.

STAGE MANAGEMENT

at Guildhall School of Music & Drama

Guildhall Theatre Technology Blog

Theatre Technology pathway blog at Guildhall School

propmakingdotcom

The Guildhall School of Music & Drama's Prop Making Weblog

Armadillo Artifacts

Relics and curios.

Design Realisation (Scenic Art, Scenic Construction and Prop Making)

Step backstage into the workshops at the Guildhall School of Music & Drama

%d bloggers like this: